|
|
 |
Manufacturers of equipment to spool/traverse/level wind a full range of flexible packaging materials.
Unique Traversing Mechanism
The spooling equipment manufactured by Double R Controls uses our unique traversing mechanism that makes no side contact with the
material, reducing the possibility of damage during the spooling process.
Trim Spooling
Equipment is available for spooling trims either coreless or on a cardboard or plastic core.
Wide Range of Materials
The techniques used on equipment manufactured by Double R Controls enable us to process both adhesive and non-adhesive
materials.
Computer Control
Computer control is a standard feature of our spooling equipment that enables the spooling characteristics to be saved
and downloaded at a later date, therefore reducing downtime.
Concept Proof by Demonstration
We have a wide range of equipment in our factory to demonstrate your product being spooled.
Fast Unloading
For small diameter spooled packages, facilities are available for automatically unloading the finished spools. This technique
is particularly useful when processing 6,000 and 12,000 metre long x 1.6 mm to 6 mm wide tear tape spools.
Typical Applications for High Productivity Spooling
With the novel and unique techniques advocated by Double R Controls, our equipment is capable of processing materials over
the width range of 0.17 mm (typically metallised polyester) up to a width of 150 mm (typically a foam material for diapers).
The equipment is also capable of spooling and traverse winding plain paper, which is particularly fragile and cannot
accept any side contact. All industries can benefit from spooled products if their process is using material over the
width range 0.17 mm to 150 mm.
Both adhesive and non-adhesive materials can be spooled on open cores or, if required, flange cores (bobbins).
See also: Technical documentation relating to spooling/traverse winding equipment.
|
|
|
|
|